How To Foam Mod A Keyboard?

How To Foam Mod A Keyboard

If you’re looking to take your gaming experience to the next level, then consider foam modding your keyboard. Foam modding your keyboard allows you to customize your gaming experience with improved comfort and performance. This article will explain how to foam mod a keyboard and the benefits of doing so. Foam modding a keyboard can dramatically improve your gaming performance and make playing games more enjoyable.

Steps to Foam Mod a Keyboard

Gather Supplies

Before beginning the process, the first step is to gather all the necessary supplies. This includes the keyboard itself, foam, scissors, and glue. Depending on the desired look, other supplies such as markers and paint may also be necessary.

Gather Supplies for Foam Mod a Keyboard


The first supply needed is a keyboard. Any type of keyboard can be used, but it should be one that is comfortable to type on.


Foam can be purchased at most craft stores, and comes in a variety of colors and thicknesses. The foam should be thick enough to provide a comfortable typing experience.


Scissors are needed to cut the foam into the desired shape. Any sharp scissors will do, but it’s best to use a pair that is designed for cutting foam.


Glue is used to attach the foam to the keys. A strong adhesive is necessary to ensure a secure fit. Hot glue is the most commonly used type of glue.

Remove Existing Keycaps

Remove Existing Keycaps

Use a Keycap Puller

The first step in foam modding a keyboard is to remove the existing keycaps. This can be done easily with a keycap puller, a tool designed to remove and replace keycaps. It is important to be gentle when using the tool, as it can damage the switches or keycaps if used too forcefully.

Clean off the Switches

Once the keycaps have been removed, the switches should be cleaned with a damp cloth or compressed air. This will help to remove any dirt or debris that may be lodged in the switches, which can interfere with the keyboard’s performance. After the switches have been cleaned, the next step is to apply the layers of foam to the underside of the keyboard.

Cut Foam to Fit

Cut Foam to Fit

Measure Keyboard

Measuring the keyboard is the first step to foam-modding a keyboard. You will need to measure the length, width, and height of the keyboard to ensure that the foam you cut will fit snugly. In addition, you should also measure the location of any switches, keys, and other components so that you can cut the foam to accommodate them.

Cut Foam to Fit

Once you have measured the keyboard, you can begin cutting the foam to fit. Depending on the type of foam you are using, you may need to use a sharp knife or scissors to cut the foam. Make sure to cut the foam accurately to ensure that it will fit perfectly. You may also need to cut out sections for the switches, keys, and other components. Be sure to double-check your measurements before cutting the foam.

Glue Foam to Keyboard

Glue Foam to Keyboard

Apply Glue

Applying glue to a keyboard to foam mod it is an important step in the process. First, you will need to select a glue that is appropriate for the foam material being used. It should be a strong glue that will stick to both the keyboard and the foam. Next, you should use a brush or a piece of cardboard to spread the glue evenly on the surface of the keyboard. Make sure that there are no lumps or bubbles, as these could affect the look of the keyboard once the foam is applied.

Position Foam on Keyboard

Once the glue is spread evenly, you can position the foam on the keyboard. Make sure that the foam covers the entire surface of the keyboard and that there are no gaps or crevices. Use a ruler or other flat object to press the foam firmly onto the keyboard. This will ensure that the foam stays in place while the glue dries.

Allow to Dry

Finally, allow the glue to dry completely before moving on to the next step. Depending on the type of glue you used, this may take anywhere from several minutes to a few hours. Once the glue is completely dry, the foam mod is complete and your keyboard is ready to use.

Benefits of Foam Modding a Keyboard

Foam modding is a popular customization method for keyboards. It is a cost-effective and simple way to customize a keyboard to fit your needs. Foam modding involves replacing the keyboard’s existing foam pads with custom-cut foam. This enables users to customize the feel of their keyboard to their own preferences.

The main benefit of foam modding a keyboard is improved comfort. Foam modding allows users to customize the thickness of the foam pads, which helps alleviate pain for those who suffer from wrist or finger fatigue. It also helps with ergonomics, as users can adjust the spacing and angles of the keys to better suit their hands.

Foam modding also helps with keystroke accuracy. By changing the thickness of the foam pads, users can adjust the amount of travel required for each keystroke. This makes it easier to type accurately, as you don’t have to press down too hard or too lightly.

Foam modding can also improve the sound of a keyboard. Some keyboards have a thocky sound, which can be annoying for some users. By customizing the foam pads, users can reduce the sound of the keystrokes. This makes it easier to type without disturbing your coworkers.

Finally, foam modding can improve the aesthetics of a keyboard. As users can customize the color and thickness of the foam pads, they can create a unique and stylish look for their keyboard.


Foam modding a keyboard is a great way to enhance its appearance and performance. With a few simple tools and materials, you can customize your keyboard to meet your exact needs. Whether you are looking for a more comfortable typing experience, increased durability, or just want to make your keyboard look better, foam modding can help you achieve your desired result. With some patience and practice, you can create a one-of-a-kind keyboard to show off to your friends.

Also Read: How to Fix Keyboard Spring Ping Noise

Frequently Asked Questions

What type of foam should I use to foam mod a keyboard?

It is best to use polyurethane foam as it is very durable and can stand up to wear and tear over time. Additionally, it is also very lightweight and easy to work with.

What tools do I need to foam mod a keyboard?

You will need a sharp knife or razor blade for cutting, a ruler for measuring, and a hot glue gun for attaching the foam to the keyboard.

How do I know where to cut the foam for my keyboard?

Measure the size of the keyboard and then use the ruler to mark where you need to cut the foam. It is important to make sure the cuts are precise and that the foam fits snugly on the keyboard.

How do I attach the foam to the keyboard?

Using a hot glue gun, apply glue to the edges of the foam and attach it to the keyboard. Make sure the foam is secure and that it does not come off easily.

How long does foam modding a keyboard take?

The amount of time it takes to foam mod a keyboard will depend on the size and complexity of the keyboard. Generally, it can take anywhere from a few hours to a few days.

Leave a Reply

Your email address will not be published. Required fields are marked *